The NLSX4402FMUTCG is a 2−bit configurable dual−supply bidirectionalauto sensing translator that does not require a directional control pin.The VCC I/O and VL I/O ports are designed to track two differentpower supply rails, VCC and VL respectively. Both the VCC and VLsupply rails are configurable from 1.5 V to 5.5 V. This allows voltagelogic signals on the VL side to be translated into lower, higher orequal value voltage logic signals on the VCC side, and vice−versa.The NLSX4402FMUTCG translator uses external pull−up resistors on theI/O lines. The external pull−up resistors are used to pull up the I/Olines to either VL or VCC. The NLSX4402FMUTCG is an excellent match foropen−drain applications such as the I2C communication bus.
Feature
- VL can be Less than, Greater than or Equal to VCC
- Wide VCC Operating Range: 1.5 V to 5.5 V
- Wide VL Operating Range: 1.5 V to 5.5 V
- High−Speed with 20 Mb/s Guaranteed Date Rate
- Low Bit−to−Bit Skew
- Enable Input and I/O Pins are Overvoltage Tolerant (OVT) to 5.5 V
- Non−preferential Powerup Sequencing
- Power−Off Protection
- Small Space Saving Package: 1.4 mm x 1.0 mm UQFN8 Package
- These Devices are Pb−Free and are RoHS Compliant
Applications
- I2C, SMBus
- Low Voltage ASIC Level Translation
- Mobile Phones, PDAs, Cameras
