The NTS0102GD,125 is a 2-bit, dual supply translating transceiver with auto direction sensing,that enables bidirectional voltage level translation. It features two 2-bit input-output ports(An and Bn), one output enable input (OE) and two supply pins (VCC(A) and VCC(B)). VCC(A)can be supplied at any voltage between 1.65 V and 3.6 V and VCC(B) can be supplied atany voltage between 2.3 V and 5.5 V, making the device suitable for translating betweenany of the voltage nodes (1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins An and OE are referenced toVCC(A) and pins Bn are referenced to VCC(B). A LOW level at pin OE causes the outputs toassume a high-impedance OFF-state. This device is fully specified for partial power-downapplications using IOFF. The IOFF circuitry disables the output, preventing the damagingbackflow current through the device when it is powered down.
Feature
- Wide supply voltage range:
- VCC(A): 1.65 V to 3.6 V and VCC(B): 2.3 V to 5.5 V
- Maximum data rates:
- Push-pull: 50 Mbps
- IOFF circuitry provides partial Power-down mode operation
- Inputs accept voltages up to 5.5 V
- ESD protection:
- HBM JESD22-A114E Class 2 exceeds 2500 V for A port
- HBM JESD22-A114E Class 3B exceeds 8000 V for B port
- MM JESD22-A115-A exceeds 200 V
- CDM JESD22-C101E exceeds 1500 V
- Latch-up performance exceeds 100 mA per JESD 78B Class II
- Multiple package options
- Specified from -40 °C to +85 °C and -40 °C to +125 °C
- I²C/SMBus
- UART
- GPIO
