The EL5177IY is a high bandwidth amplifier with an output in differential form. It is primarily targeted for applications such as driving twisted-pair lines or any application where common mode injection is likely to occur. The input signal can be in either single-ended or differential form but the output is always in differential form.On the EL5177, two feedback inputs provide the user with the ability to set the device gain (stable at a minimum gain of 1).The output common mode level is set by the reference pin (REF), which has a -3dB bandwidth of 110MHz. Generally, this pin is grounded but it can be tied to any voltage reference.Both outputs (OUT+, OUT-) are short circuit protected to withstand temporary overload condition.The EL5177IY is available in the 10 Ld MSOP package and is specified for operation over the full -40°C to +85°C temperature range.See also EL5174 (EL5177IY in 8 Ld MSOP). 
Feature
 
 
 
  - Fully differential inputs, outputs, and feedback 
 
  - Differential input range ±2.3V 
 
  - 550MHz 3dB bandwidth 
 
  - 1100V/µs slew rate 
 
  - Low distortion at 20MHz 
 
  - Single 5V or dual ±5V supplies 
 
  - 40mA maximum output current 
 
  - Low power, 12.5mA typical supply current 
 
  - Pb-free (RoHS compliant)