The MAX86140/MAX86141ENP+T are ultra-low-power, completely integrated, optical data acquisition systems. On the transmitter side, the MAX86140/MAX86141ENP+T have three programmable high-current LED drivers that can be configured to drive up to six LEDs. With two MAX86140/MAX86141ENP+T devices working in master-slave mode, the LED drivers can drive up to twelve LEDs. On the receiver side, MAX86140 consists of a single optical readout channels, while the MAX86141ENP+T has two optical readout channels that can operate simultaneously. The devices have low-noise signal conditioning analog front-end (AFE) including 19-bit ADC, an industry-lead ambient light cancellation (ALC) circuit, and a picket fence detect and replace algorithm. Due to the low power consumption, compact size, easy/flexible-to-use and industry-lead ambient light rejection capability of MAX86140/MAX86141, the devices are ideal for a wide variety of optical-sensing applications, such as pulse oximetry and heart rate detection.
The MAX86140/MAX86141ENP+T operate on a 1.8V main supply voltage and a 3.1~5.5V LED driver supply voltage. Both devices support a standard SPI compatible interface and fully autonomous operation. Each device has a large 128-word built-in FIFO. The MAX86140/MAX86141ENP+T is available in compact wafer-level package (WLP) (2.048 x 1.848mm) with 0.4mm ball pitch.
Introducing the MAX-HEALTH-BAND Heart Rate and Activity Monitor
Wristband Health Monitoring Demo with MAX86141Design Solution: REALLY Smart Wearables Customize Their Power Supply
Design Solution: Choose the Proper PMIC to Boost Your Optical Sensor SNR
Design Solution: Take a Weight Off Your Chest with a Wrist-Worn ECG Monitor
Design Solution: Designing for Wearable Health and Fitness Think Inside the Box
Design Solution: Train Your Fitness Monitor to Deal with Any Lighting Conditions
Feature
- Complete Single-Channel, Optical Data Acquisition System
- Built-in Algorithm Further Enhances Rejection of Fast Ambient Transients
- Optimized Architecture for Transmissive and Reflective Heart Rate or SpO2 Monitoring
- Low Dark Current Noise of < 50pA RMS (Sample to Sample Variance)
- Lower Effective Dark Current Noise Achievable Through Multiple Sample Modes and On-Chip Averaging
- High-Resolution, 19-bit Charge Integrating ADC
- Three Low-Noise, 8-Bit LED Current DACs
- Excellent Dynamic Range >90dB in White Card Loop-Back Test (Sample-to-Sample Variance)
- Dynamic Range Extendable to >104dB for SpO2 and >110dB for HRM with Multiple Sample Modes and On-Chip Averaging
- Excellent Ambient Range and Rejection Capability
- > 100μA Ambient Photodetector Current
- > 70dB Ambient Rejection at 120Hz
- Ultra-Low-Power Operation for Body Wearable Devices
- Low-Power Operation, Optical Readout Channel <10μA Typical at 25sps
- Short Exposure Integration Period of 14.8μs, 29.4μs, 58.7μs, 117.3μs
- Low Shutdown Current = 20μW Typical
- Built-in Algorithm Further Enhances Rejection of Fast Ambient Transients
- Miniature 2.048 x 1.848mm, 5 x 4 0.4mm Ball Pitch WLP
- -40°C to +85°C Operating Temperature Range
Applications
- - Muscle Oxygen Saturation (SmO2 and StO2)
- - Optical Heart Rate
- - Oxygen Saturation
- Optimized for Wrist, Finger, Ear, and Other Locations
- Optimized Performance for High Quality PPG Signal to Detect
- Wearable Devices for Fitness, Wellness, and Medical Applications
