It contains a GaAsP LED. The LED is optically coupled to an integrated high gain photo detector.
The HCPL-4504-360E series has short propagation delays and high CTR. The HCPL-4504-360E series also has a guaranteed propagation delay difference (tPLH-tPHL). These features make the HCPL-4504-360E series an excellent solution to IPM inverter dead time and other switching problems.The CTR, propagation delay, and CMR are specified both for TTL and IPM conditions which are provided for ease of application. This single channel, diode-transistor optocoupler is available in a 8-Pin DIP package. An insulating layer between a LED and an integrated photodetector provides electrical insulation between input and output. Separate connections for the photodiode bias and output-transistor collector increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base collector capacitance.
Feature
- Short Propagation Delays for TTL and IPM Applications
- 15 kV/ms Minimum Common Mode Transient Immunity at Vcm = 1500V for TTL/Load Drive
- High CTR at TA = 25 degrees C>25% for HCPL-4504
- Electrical Specifications for Common IPM Applications
- TTL Compatible
- Guaranteed Performance from 0 degrees C to 70 degrees C
- Open Collector Output
- Safety Approval
- Options available are:
Applications
- Inverter Circuits and Intelligent Power Module (IPM) interfacing - High Common Mode Transient Immunity (> 10 kV/ms for an IPM load/drive) and (tPLH - tPHL) Specified
- Line Receivers - Short Propagation Delays and Low Input-Output Capacitance
- High Speed Logic Ground Isolation - TTL/TTL, TTL/CMOS, TTL/LSTTL
- Replaces Pulse Transformers - Save Board Space and Weight
- Analog Signal Ground Isolation - Integrated Photodetector Provides Improved Linearity over Phototransistors
