The ADP3203JRU-0.85-RL 200 mA triple output LDO combines high PSRR, lownoise, low quiescent current, and low dropout voltage in a voltageregulator ideally suited for wireless applications with demandingperformance and board space requirements.
The low quiescent current, low dropout voltage, and wide inputvoltage range of the ADP3203JRU-0.85-RL triple LDO extend the battery life ofportable devices. The ADP3203JRU-0.85-RL triple LDO maintains power supplyrejection greater than 60 dB for frequencies as high as 100 kHzwhile operating with a low headroom voltage. The ADP3203JRU-0.85-RL tripleLDO offers much lower noise performance than competing LDOswithout the need for a noise bypass capacitor.
The ADP3203JRU-0.85-RL triple LDO is available in a miniature 16-lead 3 mm ×3 mm LFCSP package and is stable with tiny 1 µF ±30% ceramic outputcapacitors, resulting in the smallest possible board area for a widevariety of portable power needs.
The ADP3203JRU-0.85-RL triple LDO is available in output voltage combinationsranging from 0.8 V to 3.3 V and offers over current andthermal protection to prevent damage in adverse conditions.
Feature
- Bias voltage range (VBIAS): 2.5 V to 5.5 V
- LDO input voltage range (VIN1/VIN2, VIN3): 1.8 V to 5.5 V
- Three 200 mA low dropout voltage regulators
- 16-lead, 3 mm × 3 mm LFCSP
- Initial accuracy: ±1%
- Stable with 1 µF ceramic output capacitors
- No noise bypass capacitor required
- 3 independent logic controlled enables
- Over current and thermal protection
- High PSRR
- 76 dB PSRR up to 1 kHz
- 70 dB PSRR 10 kHz
- 60 dB PSRR at 100 kHz
- 40 dB PSRR at 1 MHz
- Low output noise
- 24 µV rms typical output noise at VOUT = 1.2 V
- 43 µV rms typical output noise at VOUT = 2.8 V
- Excellent transient response
- Low dropout voltage: 110 mV @ 200 mA load
- 85 µA typical ground current at no load, all LDOs enabled
- 100 µs fast turn-on circuit
- Guaranteed 200 mA output current per regulator
- −40°C to +125°C junction temperature
Applications
- Mobile phones
- Digital cameras and audio devices
- Portable and battery-powered equipment
- Portable medical devices
- Post dc-to-dc regulation
(Picture: Pinout)
