All trademarks are the property of their respective owners.
DescriptionThe LMR36006BRNXT regulator is an easy-to-use, synchronous, step-down DC/DCconverter. With integrated high-side and low-side power MOSFETs, up to0.6 A of outputcurrent is delivered over a wide input voltage range of 4.2 V to60V. Tolerance goes up to 66 V. The transient tolerance reduces the necessary design effort to protectagainst overvoltages and meets the surge immunity requirements of IEC 61000-4-5.
The LMR36006BRNXT uses peak-current-mode control to provide optimal efficiencyand output voltage accuracy. Precision enable gives flexibility by enabling a direct connection to the wide input voltageor precise control over device start-up and shutdown. The power-good flag, with built-in filteringand delay, offers a true indication of system status eliminating the requirement for an externalsupervisor.
The LMR36006BRNXT is in a HotRod? package whichenables low noise, higher efficiency, and the smallest package to dieratio. The device requires few external components and has a pinout designed for simple PCBlayout. The small solution size and feature set of the LMR36006BRNXT are designed tosimplify implementation for a wide range of end equipment, includingspace critical applications of ultra-small field transmitters and vision sensors.
Feature
- Designed forreliable and rugged applications
- Input transient protection up to 66 V
- Junction temperature range –40°C to+150°C
- Protection features: thermal shutdown, inputundervoltage lockout, cycle-by-cycle current limit, hiccup short-circuitprotection
- 0.2-V dropoutwith 0.6-A load (typical)
- Suited forscalable industrial power supplies
- Pin compatible with:
- LMR36015 (60 V, 1.5A)
- LMR33620/LMR33630 (36 V, 2 A, or 3 A)
- 1-MHz, 2.1-MHz frequency options
- Low power dissipation across loadspectrum
- 87% efficiency at 1 MHz (24VIN,5VOUT, 0.6A)
- 92% efficiency at 1 MHz(12VIN, 5VOUT, 0.6A)
- Increased light loadefficiency in PFM
- Low operating quiescent current of 26μA
- Small 2-mm × 3-mm HotRod? package
- Solutionwith few external components
- LMR36006-Q1 andLMR36015-Q1 available in 400 kHz and 2.1MHz, adjustable output, and fixed 3.3 VOUT
- Optimized for ultra low EMI requirements
- Meets CISPR25 class 5 standard
- Hotrod? package minimizes switch noderinging
- Parallel input path minimizes parasiticinductance
- Spread spectrum reduces peakemissions
- Create a customdesign using the LMR36006 with theWEBENCH? PowerDesigner
All trademarks are the property of their respective owners.
DescriptionThe LMR36006 regulator is an easy-to-use, synchronous, step-down DC/DCconverter. With integrated high-side and low-side power MOSFETs, up to0.6 A of outputcurrent is delivered over a wide input voltage range of 4.2 V to60V. Tolerance goes up to 66 V. The transient tolerance reduces the necessary design effort to protectagainst overvoltages and meets the surge immunity requirements of IEC 61000-4-5.
The LMR36006 uses peak-current-mode control to provide optimal efficiencyand output voltage accuracy. Precision enable gives flexibility by enabling a direct connection to the wide input voltageor precise control over device start-up and shutdown. The power-good flag, with built-in filteringand delay, offers a true indication of system status eliminating the requirement for an externalsupervisor.
The LMR36006 is in a HotRod? package whichenables low noise, higher efficiency, and the smallest package to dieratio. The device requires few external components and has a pinout designed for simple PCBlayout. The small solution size and feature set of the LMR36006 are designed tosimplify implementation for a wide range of end equipment, includingspace critical applications of ultra-small field transmitters and vision sensors.
- Pin compatible with:
