All trademarks are the property of their respective owners.
DescriptionThe LM5165YDRCT device isa compact, easy-to-use, 3-V to 65-V, ultra-low IQ synchronous buck converterwith high efficiency over wide input voltage and load current ranges. With integrated high-side andlow-side power MOSFETs, up to 150-mA of output current can be delivered at fixed output voltages of3.3 V or 5 V or at an adjustable output. The converter is designed to simplify implementation whileproviding options to optimize the performance for the target application. Pulse FrequencyModulation (PFM) mode is selected for optimal light-load efficiency or Constant On-Time (COT)control for nearly constant operating frequency. Both control schemes do not require loopcompensation while providing excellent line and load transient response and short PWM on-time forlarge step-down conversion ratios.
The high-side P-channel MOSFET can operate at 100% duty cycle for lowest dropout voltageand does not require a bootstrap capacitor for gate drive. Also, the current limit setpoint isadjustable to optimize inductor selection for a particular output current requirement. Selectableand adjustable start-up timing options include minimum delay (no soft start), internally fixed (900μs), and externally programmable soft start using a capacitor. An open-drain PGOOD indicator can beused for sequencing, fault reporting, and output voltage monitoring. TheLM5165YDRCT buck converter is available in a 10-pin, 3-mm × 3-mm, thermally-enhanced VSON-10 packagewith 0.5-mm pin pitch.
Feature
- Wide Input Voltage Range of 3 V to 65 V
- 10.5-μANo-Load Quiescent Current
- –40°C to 150°C Junction TemperatureRange
- Fixed (3.3-V, 5-V) or Adjustable Output Voltages
- Meets EN55022 / CISPR 22 EMI Standards
- Integrated 2-Ω PMOS Buck Switch
- Supports 100% Duty Cycle forLow Dropout
- Integrated 1-Ω NMOS SynchronousRectifier
- Eliminates External RectifierDiode
- Programmable Current Limit Setpoint (4Levels)
- Selectable PFM or COT Mode Operation
- 1.223-V ±1%Internal Voltage Reference
- 900-μs Internal or Programmable Soft Start
- Active SlewRate Control for Low EMI
- Diode Emulation Mode and PulseSkipping for Ultra-High Light-Load Efficiency Performance
- Monotonic Start-Upinto Prebiased Output
- No Loop Compensation or BootstrapComponents
- Precision Enable and Input UVLO With Hysteresis
- Pin-to-pin Compatible With theLM5166
- Thermal ShutdownProtection With Hysteresis
- 10-Pin, 3-mm × 3-mm VSONPackage
- Create a Custom Regulator Design Using WEBENCH? Power Designer
All trademarks are the property of their respective owners.
DescriptionThe LM5165 device isa compact, easy-to-use, 3-V to 65-V, ultra-low IQ synchronous buck converterwith high efficiency over wide input voltage and load current ranges. With integrated high-side andlow-side power MOSFETs, up to 150-mA of output current can be delivered at fixed output voltages of3.3 V or 5 V or at an adjustable output. The converter is designed to simplify implementation whileproviding options to optimize the performance for the target application. Pulse FrequencyModulation (PFM) mode is selected for optimal light-load efficiency or Constant On-Time (COT)control for nearly constant operating frequency. Both control schemes do not require loopcompensation while providing excellent line and load transient response and short PWM on-time forlarge step-down conversion ratios.
The high-side P-channel MOSFET can operate at 100% duty cycle for lowest dropout voltageand does not require a bootstrap capacitor for gate drive. Also, the current limit setpoint isadjustable to optimize inductor selection for a particular output current requirement. Selectableand adjustable start-up timing options include minimum delay (no soft start), internally fixed (900μs), and externally programmable soft start using a capacitor. An open-drain PGOOD indicator can beused for sequencing, fault reporting, and output voltage monitoring. TheLM5165 buck converter is available in a 10-pin, 3-mm × 3-mm, thermally-enhanced VSON-10 packagewith 0.5-mm pin pitch.
