Features
• Input Voltage Range: 1.8 V to 5.5 V, down to 1.6 V after Startup
• Output Voltage Up to 28 V
• Integrated Power Diode and Isolation Switch
• 980-mA (typical) Switch Current
• Up to 85% Efficiency at 3.6-V Input and 12-V Output
• ±2.5% Output Voltage Accuracy
• Power Save Operation Mode at Light Load
• Internal 7-ms Soft Start Time
• True Disconnection between Input and Output during Shutdown
• Output Short Circuit Protection
• Output Over-Voltage Protection
• Thermal Shutdown Protection
• 3-mm × 3-mm SOT23-6 Package
Applications
• PMOLED Power Supply
• LCD Panel
• Wearable Devices
• Portable Medical Equipment
• Sensor Power Supply
Description
The TLV61046ADBVT is a highly integrated boost converter designed for applications such as PMOLED panel, LCD bias supply and sensor module. The TLV61046ADBVT integrates a 30-V power switch, an input to output isolation switch, and a rectifier diode. It can output up to 28 V from input of a Li+ battery or two alkaline batteries in series.
The TLV61046ADBVT operates with a switching frequency at 1.0 MHz. This allows the use of small external components. The TLV61046ADBVT has an internal default 12-V output voltage setting by connecting the FB pin to the VIN pin. Thus it only needs three external components to get 12-V output voltage. The TLV61046ADBVT has typical 980-mA switch current limit. It has 7-ms built-in soft start time to reduce the inrush current. When the TLV61046ADBVT is in shutdown mode, the isolation switch disconnects the output from input to minimize the leakage current. The TLV61046ADBVT also implements output short circuit protection, output over-voltage protection and thermal shutdown.
The TLV61046ADBVT is available in a 6-pin 3-mm x 3-mm SOT23-6 package.
Feature
- Input Voltage Range: 1.8 V to 5.5 V, down to 1.6 V after Startup
- Output Voltage Up to 28 V
- Integrated Power Diode and Isolation Switch
- 980-mA (typical) Switch Current
- Up to 85% Efficiency at 3.6-V Input and 12-V Output
- ±2.5% Output Voltage Accuracy
- Power Save Operation Mode at Light Load
- Internal 7-ms Soft Start Time
- True Disconnection between Input and Output during Shutdown
- Output Short Circuit Protection
- Output Over-Voltage Protection
- Thermal Shutdown Protection
- 3-mm × 3-mm SOT23-6 Package
All trademarks are the property of their respective owners.
DescriptionThe TLV61046A is a highly integrated boost converter designed for applications such asPMOLED panel, LCD bias supply and sensor module. The TLV61046A integrates a 30-V power switch, aninput to output isolation switch, and a rectifier diode. It can output up to 28 V from input of aLi+ battery or two alkaline batteries in series.
The TLV61046A operates with a switching frequency at 1.0 MHz. This allows the use ofsmall external components. The TLV61046A has an internal default 12-V output voltage setting byconnecting the FB pin to the VIN pin. Thus it only needs three external components to get 12-Voutput voltage. The TLV61046A has typical 980-mA switch current limit. It has 7-ms built-in softstart time to reduce the inrush current. When the TLV61046A is in shutdown mode, the isolationswitch disconnects the output from input to minimize the leakage current. The TLV61046A alsoimplements output short circuit protection, output over-voltage protection and thermalshutdown.
The TLV61046A is available in a 6-pin 3-mm x 3-mm SOT23-6 package.
