The ADP5304ACPZ-1-R7 runs from an input voltage range of 2.15 V to 6.50 V, allowing the use of the multiple alkaline, NiMH, and Lithium cells, or the use of a high impedance power source. The output voltage is selectable from 0.8 V to 5.0 V by an external VID resistor to ground. The total solution requires only four tiny external components.
The ADP5304ACPZ-1-R7 operates in hysteresis mode via connecting the MODE pin to ground. In hysteresis mode, the regulator achieves excellent efficiency at a power of less than 1 mW and provides up to 50 mA of output load. The device enables very efficient power management to achieve the collection of small amounts of energy from the high impedance battery or the energy harvester to charge up the conventional capacitor or super capacitor.
The ADP5304ACPZ-1-R7 integrates an ultralow power comparator with a factory programmable voltage reference to monitor the voltage of the input power source. The voltage reference, with hysteresis, is the threshold for the stopping and starting of switching, allowing the use of the high impedance power source.
Other key features of the ADP5304ACPZ-1-R7 include separate enabling and an output discharge function (QOD). Safety features, such as overcurrent protection, thermal shutdown (TSD), and input undervoltage (UVLO), are also included.
The ADP5304ACPZ-1-R7 is available in 10-lead, 3 mm × 3 mm LFCSP package rated for the −40°C to +125°C junction temperature range.
Applications- Energy (gas, water) metering
- Energy harvesting applications
- Portable and battery-powered equipment
- Medical applications
- Keep-alive power supply
Feature
- Input start-up voltage range: 2.15 V to 6.50 V
- Operation down to 2.00 V
- Ultralow, 260 nA quiescent current with no load
- Selective output voltage from 1.2 V to 3.6 V (or 0.8 V to 5.0 V)
- ±2.5% output accuracy over the full temperature range
- Selectable hysteresis or pulse-width modulation (PWM) operation mode
- Output current up to 50 mA in hysteresis mode
- VINOK flag to monitor the input voltage
- Ultrafast stop switching control
- 100% duty cycle operation mode
- Quick output discharge (QOD) option
- Undervoltage lockout (UVLO), OCP, and thermal shutdown (TSD) protection
- 10-lead, 3 mm × 3 mm LFCSP package
- −40°C to +125°C operating junction temperature range
Applications
- Energy (gas, water) metering
- Energy harvesting applications
- Portable and battery-powered equipment
- Medical applications
- Keep-alive power supply
(Picture: Pinout)
