The HCPL-0370/3700 and HCPL-3760-560E are voltage/current threshold detection optocouplers. The HCPL-3760-560E is a low-current version of the HCPL-0370/3700. To obtain lower current operation, the HCPL-3760-560E uses a high-efficiency AlGaAs LED which provides higher light output at lower drive currents. The devices utilize threshold sensing input buffer ICs which permit control of threshold levels over a wide range of input voltages with a single external resistor.The input buffer incorporates several features: hysteresis for extra noise immunity and switching immunity, a diode bridge for easy use with ac input signals, and internal clamping diodes to protect the buffer and LED from a wide range of over-voltage and over-current transients. Because threshold sensing is done prior to driving the LED, variations in optical coupling from the LED to the detector will have no effect on the threshold levels.
Feature
- StandardHCPL-0370/3700) and low input current (HCPL-3760) versions
- AC or DC input
- Programmable Sense Voltage
- Hysteresis
- Logic Compatible Output
- Thresholds Guaranteed over Temperature
- Thresholds Independent of LED Optical Parameters
- Recognized under UL 1577 and CSA approved for Dielectric Withstand Proof Test Voltage of 3750 Vac,1 minute.
- Options available are: 060 = IEC/EN/DIN EN 60747-5-2 Option300 = Gull Wing Surface Mount Option500 = Tape and Reel Packaging Option (1 K min.)XXXE = Lead Free Option
Applications
- Limit Switch Sensing
- Low Voltage Detector
- AC mains and DC link voltage detection
- Relay Contact Monitor
- Relay Coil Voltage Monitor
- Current Sensing
- Microprocessor Interfacing
