The 20070222-1222 parts manufactured by CYMBET are available for purchase at 9icnet Electronics. Here you can find various types and values of electronic parts from the world's leading manufacturers. The 20070222-1222 components of 9icnet Electronics are carefully chosen, undergo stringent quality control, and are successfully meet all required standards.
The production status marked on 9icnet.com is for reference only. If you didn't find what you were looking for, you can get more valuable information by emails, such as the 20070222-1222 Inventory quantity, preferential price, datasheet, and manufacturer. We are always happy to hear from you, so feel free to contact us.
The 2007 is TRACER KIT CIRCUIT, that includes 2.3mm Test Sockets For Use With Related Products, they are designed to operate with a 2000 Series, Type is shown on datasheet note for use in a Wire Tracer, that offers Packaging features such as Bulk, Current Rating is designed to work in 30A, as well as the Flange Features, the device can also be used as Identifies Breakers, Open Circuits and Pinouts in Various Cable Types Specifications. In addition, the Number of Circuits is 7, the device is offered in 10 AWG Wire Gauge, the device has a 0.438" (11.12mm) of Pitch, and Number of Rows is 2, and the Terminal Block Type is Barrier Block, and Number of Wire Entries is 14, and the Top Termination is Screws, and Bottom Termination is Closed, and the Barrier Type is 2 Wall (Dual).
The 2007022-1 is CONN MOD JACK 8P8C R/A SHLD, that includes Solder Termination, they are designed to operate with a Up and Down Tab Direction, Shielding is shown on datasheet note for use in a Shielded, EMI Finger, that offers Ratings features such as Cat5, Packaging is designed to work in Bulk, as well as the 90° Angle (Right) Orientation, the device can also be used as 2 Number of Rows. In addition, the Number of Positions Contacts is 8p8c (RJ45, Ethernet), the device is offered in 2 Number of Ports, the device has a Through Hole of Mounting Type, and Features is Board Guide, Gigabit, and the Contact Material is Phosphor Bronze, and Contact Finish is Gold, and the Connector Type is Jack.
The 2007009-1 is CONN RCPT 64POS 1MM SMD GOLD, that includes Receptacle, Outer Shroud Contacts Connector Type, they are designed to operate with a Gold Contact Finish, Contact Finish Thickness is shown on datasheet note for use in a 50μin (1.27μm), that offers Height Above Board features such as 0.212" (5.38mm), Mated Stacking Heights is designed to work in 8mm, 9mm, 10mm, as well as the Surface Mount Mounting Type, the device can also be used as 64 Number of Positions. In addition, the Number of Rows is 2, the device is offered in Digi-ReelR Alternate Packaging Packaging, the device has a 0.039" (1.00mm) of Pitch, and Series is Free Height (FH) IEEE 1386, PMC.
The 2007009-2 is CONN RCPT 84POS 1MM SMD GOLD, that includes Surface Mount Mounting Type, they are designed to operate with a Receptacle, Outer Shroud Contacts Connector Type, Contact Finish is shown on datasheet note for use in a Gold, that offers Series features such as Free Height (FH) IEEE 1386, PMC, Packaging is designed to work in Digi-ReelR Alternate Packaging, as well as the 8mm, 9mm, 10mm Mated Stacking Heights, the device can also be used as 84 Number of Positions. In addition, the Contact Finish Thickness is 50μin (1.27μm), the device is offered in 2 Number of Rows, the device has a 0.212" (5.38mm) of Height Above Board, and Pitch is 0.039" (1.00mm).
