The SPI port provides access to the rate sensor, an internal temperature sensor, and two external analog signals (using internal ADC). The digital data available at the SPI port is proportional to the angular rate about the axis that is normal to the top surface of the package.
An additional output pin provides a precision voltage reference. A digital self-test function electromechanically excites the sensor to test the operation of the sensor and the signal-conditioning circuits.
The ADIS16060BCCZ is available in an 8.2 mm × 8.2 mm × 5.2 mm, 16-terminal, peripheral land grid array (LGA) package.
Applications:
- Platform stabilization
- Image stabilization
- Guidance and control
- Inertial measurement units
- Robotics
Feature
- Complete angular rate digital gyroscope14-bit resolution
- Scalable measurement rangeInitial range: ±80°/sec (typical) Increase range with external resistor
- Z-axis (yaw rate) response
- SPI digital output interface
- High vibration rejection over wide frequency
- 5 V single-supply operation
- 8.2 mm × 8.2 mm × 5.2 mm package
- 2000 g-powered shock survivability
- 1 kHz bandwidthSelectable using external capacitor
- Externally controlled self-test
- Internal temperature sensor output
- Dual auxiliary 14-bit ADC inputs
- Absolute rate output for precision applications
- RoHS compliant
- −40°C to +105°C operation
Applications
- Platform stabilization
- Image stabilization
- Guidance and control
- Inertial measurement units
- Robotics
(Picture: Pinout)
