The Atmel 4-Kb 3-wire Serial EEPROM, is organized as either 512 words x 8 bits or 256 words x 16 bits with sequential read operation. It is optimized for automotive applications where low-power and low-voltage operations are essential. The EEPROM is available in two 8-lead, space-saving packaging options and operates at 2.5V (Vcc = 2.5V to 5.5V). The 3-wire serial interface consists of a data input, output, and a shift clock. All programming cycles are completely self-timed, and no separate erase cycle is required before write. Block write protection is program enabled and separate program enable and disable instructions are provided for additional data protection. Hardware data protection provided to protect against inadvertent write attempts to the status register. Any serial communication suspension can be accomplished without resetting the serial sequence.
Feature
- User selectable 512 x 8 or 256 x 16 Organization (4 Kbit)
- Industry Standard Microwire Serial I/O
- Up to 2 MHz clock compatibility
- Self-Timed Erase and Write Cycles (5 ms max.)
- Low Power Consumption
- Read current 0.5 mA (Typ), 2.0 mA (Max)
- Write current 0.5 mA (Typ),2.0 mA (Max)
- Standby current 10.0 uA (Typ), 15.0 uA (Max)
- Software Write-Protection
- More than 1 million erase/write cycles
- Data retention > 100 years
- Extended Temperature Ranges Available (Grade 1 as defined in AEC-Q100)
- Grade 1 Temperature Range: -40°C to 125°C
- Qualified for Automotive Applications
- Factory Programming Available
- Available in 8-pin SOIC (150 mil), 8-pin TSSOP, 8-pad UDFN, 8-pad XDFN, and 8-ball VFBGA packages
